The TWMNH-48HE is an N-type monofacial dual glass solar module with a full black finish and a black anodised aluminium frame. This page covers the 450W power class.
| Maximum power (Pmax) | 450 W |
|---|---|
| Maximum power voltage (Vmp) | 29.81 V |
| Maximum power current (Imp) | 15.10 A |
| Open-circuit voltage (Voc) | 35.95 V |
| Short-circuit current (Isc) | 15.81 A |
| Power tolerance | 0 to +3% |
| Maximum system voltage | 1500 VDC |
| Maximum fuse current | 30 A |
| Operating temperature | -40 to +70 °C |
| Temperature coefficient of Pmax | -0.28 %/°C |
| Temperature coefficient of Voc | -0.24 %/°C |
| Temperature coefficient of Isc | 0.046 %/°C |
STC: irradiance 1000 W/m², cell temperature 25 °C, spectrum AM1.5.
| Module dimensions | 1762 x 1134 x 30 mm |
|---|---|
| Module weight | 23.7 kg |
| Cell technology | TNC |
| Cell arrangement | 96 cells (6 x 16) |
| Front glass | 2.0 mm AR-coated semi-tempered glass |
| Rear glass | 2.0 mm semi-tempered glass |
| Frame | Black anodised aluminium alloy |
| Junction box | IP68; 3 diodes |
| Output cable cross-section | 4.0 mm² |
| Front static load | 6000 Pa |
| Rear static load | 4000 Pa |
Module static-load figures describe component pressure ratings. The complete installed system requires assessment for the project conditions.
| Modules per pallet | 36 |
|---|---|
| Modules per 40-foot high-cube container | 936 |
Confirm the final packing arrangement for the order.
Use this glass-and-frame configuration where the project design calls for a rigid solar module. Check roof capacity, the mounting system, site wind and snow loads and applicable electrical requirements before selection.
It has 2.0 mm front and rear glass, a black anodised aluminium frame and a 30 mm module thickness.
The electrical values on this page apply to the 450W power class. Confirm the exact power class when requesting a quotation.
Provide the required model and quantity, project location, mounting concept, delivery destination and target schedule.
Include the exact model in your enquiry.